Proximity and Touch Explained - Black keyhole

welcome to our keyhole, we provide you various knowledge from various sources such as Electric&Electronic, Health, Arduino, IOT, Diy projects, A/l past paper and model paper, Even though you can keep in touch with current technology

Proximity and Touch Explained

Share This

 



 


This section deals with detecting objects or measuring their distance from the sensor. This section includes about Touch Screen, Ultrasonic Distance, Optical Distance, Capacitive sensors. .

 

 

  • check here my previous tutorials
  1.  ESP32-CAM Face detection|Face Recognition    
  2. Machine to Machine Interactions
  3.  mesh networking- explained

Touch Screens


 

Touch screens are commonly used in cellular phones and tablet computers. There

are many different technologies used in touch screens. The most commonly used are

resistive touch screens

Resistive touch screens are one of the older and more readily used touch screen

technologies. They rely on a transparent sheet on top of the display. This sheet is

flexible and also conductive.

 

Both the top and bottom surfaces are coated with a conductive layer. Insulating

dots are evenly sprayed onto the rigid bottom surface to keep the layers apart, except

when they are pressed together.

To determine the X position of a touch, A is set to 0 V and B to 5 V, establishing a

voltage gradient across the top surface. The voltage measured at C, or for that matter

D, will be proportional to the X position. This is converted into coordinates using an

analog-to-digital converter.

The conductive layer acts just like a potentiometer with C as the slider. If the

device measuring the voltage at C has a very high input impedance, then the resistance

of the track from the surface to the terminal C can be ignored. Most microcontrollers

will have an analog-to-digital converter with a high input resistance, typically

several MΩ. So, the voltage at C will be between 0 and 5 V in direct proportion

to the distance from A of the touch.

When it comes to reading the Y position, some crafty footwork has to take place.

Now C will be set to 0V, D to 5V, and the voltage measured at A or B.

All this processing will be carried out by either a special-purpose controller chip

or a microcontroller.

 

You can make Bussiness queries by using the business queries section. You can find that at the bottom of this page

  • You can make queries related to place ads, product placement, and advertising
  • make project queries related to DIY project section (college and school students for their projects)

. Ultrasonic Distance



 

Ultrasonic distance-measuring devices are much loved by the developers of hobby

robots. They are also found in commercial equivalents to the tape measure.

These devices send out a pulse of ultrasound and time how long it takes for the

reflection to come back. A simple calculation involving the speed of sound will determine

the distance to the object

These devices have a measurement range of up to around 5 meters (15 ft), but this

depends very much on the size and sound reflecting properties of the object. They

also suffer limits of accuracy due to variations in the speed of sound, which is dependent

on many factors, including atmospheric pressure, humidity, and temperature.

For example, at 0°C, the speed of sound in dry air is 331 meter/second, but this rises

to 346 meter/second at 25°C—a difference of 4.5 percent.

Sometimes separate transducers are used for sending and receiving the pulses of

ultrasound, and sometimes a single transducer is used in both roles.

Some devices rely on a microcontroller to initiate the pulse and time the echo.

Other, more expensive, devices will have their own digital processing that generates

an output that can be read from a microcontroller as one of the following:

• An analog output voltage proportional to the distance

• Serial data

• A train of varying pulse lengths dependent on the distance

In some cases, all three outputs are provided, such as with the SparkFun device

SKU: SEN-00639.

Example: Assuming that in dry air at 20°C, the speed of sound is 340 meter/second,

if the time period between a pulse of ultrasound being sent is 10 milliseconds, how

far away is the reflecting object?

Answer: distance = velocity × time = 340 × 0.01 = 3.4 m

However, that is the distance for the entire round-trip, so the actual distance to the

object is half of that, or 1.7 meters.

 

Optical Distance




Another useful device for measuring distance at close range is the infrared optical

sensor. This type of device uses the amount of reflection of a modulated

infrared pulse to determine the distance to the object.

 

Infrared optical sensors are used for closer range measurements than the ultrasonic

devices and produce an analog output. This is not linear or particularly accurate,

so these devices are most useful for simple proximity detection rather than

actual measurement.

 

  • check here my previous tutorials
  1.  ESP32-CAM Face detection|Face Recognition    
  2. Machine to Machine Interactions
  3.  mesh networking- explained

 

You can make Bussiness queries by using the business queries section. You can find that at the bottom of this page

  • You can make queries related to place ads, product placement, and advertising
  • make project queries related to DIY project section (college and school students for their projects) 

 

 

Capacitive Sensors



Capacitive sensors are frequently used as proximity or touch sensors as a replacement for mechanical push switches. They sense conductors and therefore are ideal for sensing proximity of a hand or finger.

 

 

In this case, the sensing is accomplished using two general-purpose input/output

(GPIO) pins of a microcontroller. The Send pin is configured as an output, and the

Receive pin as an input. A single fixed resistor between the two pins forms one half

of an RC arrangement, with the capacitor formed by the object being sensed and a

sensor plate forming the other half of the capacitor.

When a hand moves close to the plate, the capacitance increases. This is sensed

as the control software toggles the state of the Send pin and times how long it takes

for the Receive pin to catch up with the changed state. In this way, it effectively measures

the capacitance and hence the proximity of the object being sensed. The longer

it takes for the Receive pin to change to the same state as the Send pin, the closer the

object is to the plate.

This type of sensing has the advantages that it requires very little special hardware

and can sense through glass, plastic, and other insulators. More advanced

versions of this approach can sense in two dimensions to make a capacitative touch

screen.


No comments:

Post a Comment

business queries

Pages